STK672-640A-E - 2-phase Stepping Motor Driver

ON Semiconductor

Datasheet Details

Built-in overcurrent detection function (output current OFF).
Built-in overheat detection function (output current OFF).
If either over-current or overheat detection function is activated, the FAULT signal (active low) is output.
Built-in power on reset function.
The motor speed is controlled by the frequency of an external clock signal.
2 phase or 1-2 phase excitation switching function.
Using either or both edges of the cloc.

📁 STK672-640A-E Similar Datasheet

STK672-642A-E - 2-phase Stepping Motor Driver (Sanyo Semicon Device)
STK672-630A-E - 2-phase Stepping Motor Driver (Sanyo Semicon Device)
STK672-632A-E - 2-phase Stepping Motor Driver (Sanyo Semicon Device)
STK672-010 - Thick-Film Hybrid IC (Sanyo Semicon Device)
STK672-020 - Unipolar Fixed-Current Chopper (Sanyo Semicon Device)
STK672-040 - Microstep Operation-Supported 4-Phase Stepping Motor Driver (Io= 1.5A) (Sanyo Semicon Device)
STK672-050 - Thick-Film Hybrid IC (Sanyo Semicon Device)
STK672-050-E - Stepping Motor Driver (Sanyo Semicon Device)

Other Datasheets by ON Semiconductor

Published: Jan 19, 2016 |