Datasheet4U Logo Datasheet4U.com

NCP730 - LDO Regulator

General Description

TSOP

Pin No.

Power supply input pin.

Ground pin.

enabled, low

disabled).

up resistor is not require

Key Features

  • very low quiescent current, fast transient response and high input and output voltage ranges. The NCP730 is CMOS LDO regulator designed for up to 38 V input voltage and 150 mA output current. Quiescent current of only 1 mA makes this device ideal solution for battery.
  • powered, always.
  • on systems. Several fixed output voltage versions are available as well as the adjustable version. The device (version B) implements power good circuit (PG) which indicates that output volt.

📥 Download Datasheet

Datasheet Details

Part number NCP730
Manufacturer onsemi
File Size 6.24 MB
Description LDO Regulator
Datasheet download datasheet NCP730 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCP-NFJ C15 Type Accessories Hirose Electric
NCP-NFP C15 Type Accessories Hirose Electric
NCP03WB473E05RL Thermistors Murata
NCP03WB473J05RL NTC Thermistors Murata
NCP03WB473J05RL Thermistors Murata

Other Datasheets by onsemi

Part Number Description
NCP731 LDO Regulator
NCP734 LDO Regulator
NCP700 BiCMOS RF LDO Regulator
NCP700B BiCMOS RF LDO Regulator
NCP700C BiCMOS RF LDO Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LDO Regulator, 150 mA, 38 V, 1 mA IQ, with PG NCP730 The NCP730 device is based on unique combination of features − very low quiescent current, fast transient response and high input and output voltage ranges. The NCP730 is CMOS LDO regulator designed for up to 38 V input voltage and 150 mA output current. Quiescent current of only 1 mA makes this device ideal solution for battery− powered, always−on systems. Several fixed output voltage versions are available as well as the adjustable version. The device (version B) implements power good circuit (PG) which indicates that output voltage is in regulation. This signal could be used for power sequencing or as a microcontroller reset. Internal short circuit and over temperature protections saves the device against overload conditions.