Datasheet4U Logo Datasheet4U.com

NCP5901BE - VR12 Compatible Synchronous Buck MOSFET Drivers

Description

Pin No.

Description Floating bootstrap supply pin for high side gate driver.

Connect the bootstrap capacitor between this pin and the SW pin.

Features

  • Faster Rise and Fall Times.
  • Adaptive Anti.
  • Cross.
  • Conduction Circuit.
  • Integrated Bootstrap Diode.
  • Pre OV function.
  • ZCD Detect.
  • Floating Top Driver Accommodates Boost Voltages of up to 35 V.
  • Output Disable Control Turns Off Both MOSFETs.
  • Under.
  • voltage Lockout.
  • Power Saving Operation Under Light Load Conditions.
  • Direct Interface to NCP6151 and Other Compatible PWM Controllers.

📥 Download Datasheet

Datasheet Details

Part number NCP5901BE
Manufacturer onsemi
File Size 125.83 KB
Description VR12 Compatible Synchronous Buck MOSFET Drivers
Datasheet download datasheet NCP5901BE Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCP500 150mA CMOS Low Noise Low-Dropout Voltage Regulator ON
NCP5007 Compact Backlight LED Boost Driver ON
NCP511 Low-Dropout Voltage Regulator ON
NCP51752 4.5-A/9-A Isolated Single Channel Gate Driver onsemi
NCP5203 2-in-1 DDR Power Controller ON

Other Datasheets by onsemi

Part Number Description
NCP5901B VR12 Compatible Synchronous Buck MOSFET Drivers
NCP5901 VR12 Compatible Synchronous Buck MOSFET Drivers
NCP5901E VR12 Compatible Synchronous Buck MOSFET Drivers
NCP590 Ultra Low Dropout CMOS LDO
NCP5911 IMVP7.0 Compatible Synchronous Buck MOSFET Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NCP5901BE Product Preview VR12 Compatible Synchronous Buck MOSFET Drivers The NCP5901BE is a high performance dual MOSFET gate driver optimized to drive the gates of both high−side and low−side power MOSFETs in a synchronous buck converter. It can drive up to 3 nF load with a 25 ns propagation delay and 20 ns transition time. Adaptive anti−cross−conduction and power saving operation circuit can provide a low switching loss and high efficiency solution for notebook and desktop systems. Bidirectional EN pin can provide a fault signal to controller when the gate driver fault detect under OVP, UVLO occur. Also, an under−voltage lockout function guarantees the outputs are low when supply voltage is low.
Published: |