NCP5162 - General Purpose Synchronous Buck Controller

ON Semiconductor

NCP5162 Datasheet Preview — Preview of NCP5162 PDF

Datasheet Details

Part number	NCP5162
Manufacturer	ON Semiconductor ↗
File Size	537.82 KB
Description	General Purpose Synchronous Buck Controller
Datasheet	NCP5162-ONSemiconductor.pdf

NCP5162 Product details

Description

PACKAGE PIN # SO 16 1 2, 3, 4, 6 5 7 8 9 10 11 12 13 14 15 16 PIN SYMBOL Disable NC SS COFF VFFB VCC2 VGATE(H) PGND VGATE(L) VCC1 LGND COMP VFB NCP5162 FUNCTION This pin is internally pulled down to ground through a resistor, providing a logic 0 if left open.When pulled to VCC, The output gate drivers are pulled low, powering off the external output stage.At the same time the Soft Start capacitor is slowly discharged by an internal 2.0 μA current source, setting the time out before t

Features

0.8% output tolerance, VCC monitor, and programmable Soft Start capability. The NCP5162 is available in a 16 pin surface mount package. Features.
Dual N.
Channel Design.
Excess of 1.0 MHz Operation.
100 ns Transient Response.
2.0 A Gate Drivers.
1.02 V Reference Voltage with 0.8% Tolerance.
5.0 V & 12 V Operation.
Remote Sense.
Programmable Soft Start.
Lossless Short Circuit Protection.
VCC Monitor.

📁 NCP5162 Similar Datasheet

NCP511 - Low-Dropout Voltage Regulator (ON)
NCP51752 - 4.5-A/9-A Isolated Single Channel Gate Driver (onsemi)
NCP500 - 150mA CMOS Low Noise Low-Dropout Voltage Regulator (ON)
NCP5007 - Compact Backlight LED Boost Driver (ON)
NCP5203 - 2-in-1 DDR Power Controller (ON)
NCP551 - Low-Dropout Voltage Regulator (ON)
NCP561 - 150mA CMOS Low Iq Low-Dropout Voltage Regulator (ON)
NCP565 - Linear Regulator (ON)

Other Datasheets by ON Semiconductor

NCP5104 - Half Bridge Driver
NCP5106A - High and Low Side Driver
NCP5106B - High and Low Side Driver
NCP5109A - High and Low Side Driver
NCP5109B - High and Low Side Driver
NCP51100 - Low-Side Gate Driver

Published: Jan 24, 2016 |