NCP1597B - 2 A Synchronous Buck Regulator

ON Semiconductor

NCP1597B Datasheet Preview — Preview of NCP1597B PDF

Datasheet Details

Part number	NCP1597B
Manufacturer	ON Semiconductor ↗
File Size	560.24 KB
Description	2 A Synchronous Buck Regulator
Datasheet	NCP1597B_ONSemiconductor.pdf

NCP1597B Product details

Description

Pin No Symbol 1 EN 2 VCC 3 VCCP 4 AGND 5 FB 6 7, 8 9, 10 EP NC LX PGND PAD Figure 1. Block Diagram Description Logic input to enable the part.Logic high turns on the part and a logic low disables it.An internal pullup forces the part into an enable state when no external bias is present on the pin.Input supply pin for internal bias circuitry.A 0.1 mF ceramic bypass capacitor is preferred to connect to this pin.Power input for the power stage Analog ground pin.Connect to thermal pad

Features

including fixed internal switching frequency (FSW), and an internal soft.
start to limit inrush current. Using the EN pin, shutdown supply current is reduced to 3 mA maximum. Other features include cycle.
by.
cycle current limiting, short.
circuit protection, power saving mode and thermal shutdown. Features.
Input Voltage Range: from 4.0 V to 5.5 V.
Internal 140 mW High.
Side Switching P.
Channel MOSFET and 90 mW Low.
Side N.

📁 NCP1597B Similar Datasheet

NCP1500 - Dual Mode PWM/Linear BUCK Converter (ON)
NCP1530 - 600mA PWM/PFM Step-Down Converter (ON)
NCP1550 - 600 kHz PWM/PFM Step-Down DC-DC Controller (ON)
NCP1560 - Full Featured Voltage Mode PWM Controller (ON)
NCP15WB333E03RC - Thermistors (Murata)
NCP15WB333J03RC - Thermistors (Murata)
NCP15WB333x03RC - NTC Thermistors (Murata)
NCP15WB473D03RC - Thermistors (Murata)

Other Datasheets by ON Semiconductor

NCP1597A - 2.0A Synchronous Buck Regulator
NCP1592 - Synchronous Buck PWM Switcher
NCP1593A - Synchronous Buck Regulator
NCP1593B - Synchronous Buck Regulator
NCP1594A - Buck Converter
NCP1594B - Buck Converter

Published: Aug 26, 2010 |