The following content is an automatically extracted verbatim text
from the original manufacturer datasheet and is provided for reference purposes only.
View original datasheet text
MC12095 2.5 GHz Low Power Prescaler With Stand-By Mode
The MC12095 is a single modulus prescaler for low power frequency division of a 2.5 GHz high frequency input signal. MOSAIC Vt technology is utilized to achieve low power dissipation of 24 mW at a minimum supply voltage of 2.7 V. On–chip output termination provides output current to drive a 2.0 pF (typical) high impedance load. If additional drive is required for the prescaler output, an external resistor can be added in parallel from the OUT pin to GND to increase the output power. Care must be taken not to exceed the maximum allowable current through the output. Divide ratio control input (SW) selects the required divide ratio of ÷2 or ÷4.
MC12095 Datasheet
