Datasheet4U Logo Datasheet4U.com

CAT3604A - 4-Channel Regulated Charge Pump White LED Driver

Description

The CAT3604A is a charge pump operating in either 1x (LDO) mode or 1.5x fractional mode regulating current through each of the 4 LED pins.

Operation at a fixed high frequency of 1 MHz typical allows the use of very small value ceramic capacitors.

📥 Download Datasheet

Datasheet Details

Part number CAT3604A
Manufacturer onsemi
File Size 222.97 KB
Description 4-Channel Regulated Charge Pump White LED Driver
Datasheet download datasheet CAT3604A Datasheet

📁 Similar Datasheet

  • CAT3604 - 4-Channel Regulated Charge Pump White LED Driver (Catalyst Semiconductor)
  • CAT3604V - 4-Channel Quad-Mode LED Driver (Catalyst Semiconductor)
  • CAT3603 - 3-Channel LED Driver (Catalyst Semiconductor)
  • CAT3606 - 6-Channel Low Noise Charge Pump White LED Driver (Catalyst Semiconductor)
  • CAT3612 - Programmable 300mA Camera Flash LED Driver (Catalyst Semiconductor)
  • CAT3614 - 4-Channel 1-Wire LED (Catalyst Semiconductor)
  • CAT3616 - 6-Channel Charge Pump LED Driver (Catalyst Semiconductor)
  • CAT3626 - 6-Channel LED Driver (Catalyst Semiconductor)
  • CAT3636 - 6-Channel LED Driver (Catalyst Semiconductor)
  • CAT3637 - 6-Channel Programmable High Efficiency Quad-Mode LED Driver (Catalyst Semiconductor)
Other Datasheets by ON Semiconductor
  • CAT3604 - 4-Channel Regulated Charge Pump White LED Driver
  • CAT3604V - 4-Channel LED Driver
  • CAT3603 - 3-Channel LED Driver
  • CAT3606 - 6-Channel Low Noise Charge Pump White LED Driver
  • CAT3612 - Programmable 300 mA Camera Flash LED Driver
  • CAT3614 - 4-Channel 1-Wire LED Driver
  • CAT3616 - 6-Channel Charge Pump LED Driver
  • CAT3626 - LED Driver

Full PDF Text Transcription

Click to expand full text
CAT3604A 4-Channel Regulated Charge Pump White LED Driver Description The CAT3604A is a charge pump operating in either 1x (LDO) mode or 1.5x fractional mode regulating current through each of the 4 LED pins. Operation at a fixed high frequency of 1 MHz typical allows the use of very small value ceramic capacitors. The CAT3604A drives white light-emitting diodes (LEDs) connected in parallel and provides tightly matched regulated current to achieve uniformity of brightness in LCD backlighting applications. An external resistor RSET controls the output current level. LED currents of up to 30 mA are supported over a range of input supply voltages from 3 V to 5.5 V, making the device ideal for battery-powered applications.
Published: |