AMIS-30542 Datasheet (ON Semiconductor) - Micro-Stepping Motor Driver

AMIS-30542, Micro-Stepping Motor Driver

Name GND DI CLK NXT DIR ERR SLA / CPN CPP VCP CLR CS VBB MOTYP GND MOTYN MOTXN GND MOTXP VBB / POR/WD TST0 DO VDD Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15, 16 17, 18 19, 20 21, 22 23, 24 25, 26 27 30 28 29 31 32 Description Ground SPI Data In SPI Clock Input Next micro *step input Direction

AMIS-30542 Micro-Stepping Motor Driver Introduction The AMIS 30542 is a micro stepping stepper motor driver for bipolar stepper motors.

The chip is connected through I/O pins and a SPI interface with an external microcontroller.

It has an on chip voltage regulator, reset output and watchdog reset, able to supply peripheral devices.

AMIS 30542 contains a current translation table and takes the next micro step depending on the clock signal o

AMIS-30542 Features

* Dual H

* Bridge for 2

* Phase Stepper Motors

* Programmable Peak

* Current Up to 2.2 A Continuous† (5 A Short Time) Using a 5

* bit Current DAC

* On

* Chip Current Translator

* SPI Interface

* Speed and Load Angle Output