Datasheet4U Logo Datasheet4U.com

ML9060 - 1/2 DUTY / 160-OUTPUT STATIC LCD DRIVER

Description

The ML9060 consists of a 320-bit shift register, a 320-bit data latch, 160 sets of LCD drivers, and a common signal generator circuit.

Features

  • Logic power supply : 2.7 to 5.5V.
  • LCD Driving voltage : 4.5 to 16V.
  • Maximum number of segments that can be driven: Static display mode : 160 segments 1/2 Duty display mode : 320 segments.
  • Serial transfer clock : 1 MHz max.
  • The microcontroller interface consists of the three signals DATA IN, CLOCK IN, and LOAD IN.
  • An RC oscillator circuit is built in which can use either an external resistor or the internal resistor.
  • Cascade conne.

📥 Download Datasheet

Datasheet Details

Part number ML9060
Manufacturer OKI Electric
File Size 156.29 KB
Description 1/2 DUTY / 160-OUTPUT STATIC LCD DRIVER
Datasheet download datasheet ML9060 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ML9042-01 DOT MATRIX LCD CONTROLLER DRIVER LAPIS
ML9058E 132-Channel LCD Driver LAPIS
ML9059E 132-Channel LCD Driver LAPIS
ML9077 Power-saving solar power supply control LSI LAPIS
ML9092-01 LCD Driver LAPIS

Other Datasheets by OKI Electric

Part Number Description
ML9040 DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER
ML9040-Axx DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER
ML9040-Bxx DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER
ML9041 DOT MATRIX LCD CONTROLLER DRIVER
ML9044 DOT MATRIX LCD CONTROLLER DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
E2B0051-19-22 ¡ Semiconductor ¡ Semiconductor ML9060 1/2 DUTY, 160-OUTPUT STATIC LCD DRIVER im in This version: Feb. 1999 ML9060 ar y Pr el GENERAL DESCRIPTION The ML9060 consists of a 320-bit shift register, a 320-bit data latch, 160 sets of LCD drivers, and a common signal generator circuit. The LCD display data is input serially to the shift register from the DATA IN pin in synchronization with the CLOCK IN signal, and is stored in the data latch by the LOAD IN signal. The LCD display data stored in the data latch is output via the LCD drivers. A maximum of 160 segments of LCD can be driven in static display mode and a maximum of 320 segments can be driven directly in the 1/2 duty display mode.
Published: |