Datasheet4U Logo Datasheet4U.com

LMV951 - Rail-to-Rail Input and Output Amplifier

Description

The LMV951 amplifier is capable of operating at supply voltages from 0.9V to 3V with guaranteed specs at 1V and 1.8V single supply.

Features

  • (Typical 1.0V supply, unless otherwise noted) n Guaranteed 1V single supply operation n Wide bandwidth n No VOS glitch over the input CMVR n No input IBIAS current reversal over VCM range n Buffered output stage n High output drive capability n Output short circuit.
  • Sink current 35 mA.
  • Source current 45 mA n Rail-to-rail buffered output.
  • @ 600Ω load 32 mV from either rail 12 mV from either rail.
  • @ 2 kΩ load n Temperature range.
  • 40˚C to 125˚C Applicati.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LMV951 LMV951 1-V 2.7-MHz Zero Crossover Rail-to-Rail Input and Output Amplifier With Shutdown (Rev. D) ETCTI
LMV921 Single Low Power Operational Amplifiers Texas Instruments
LMV922 Dual Low Power Operational Amplifiers Texas Instruments
LMV924 Quad Low Power Operational Amplifiers Texas Instruments
LMV931 Single Low Voltage Operational Amplifiers ON Semiconductor

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
LMV921 1.8V / 1MHz / Low Power Operational Amplifiers
LMV922 1.8V / 1MHz / Low Power Operational Amplifiers
LMV924 1.8V / 1MHz / Low Power Operational Amplifiers
LMV931 1.8V / RRIO Operational Amplifiers
LMV932 1.8V / RRIO Operational Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com LMV951 1V, 2.7 MHz, Rail-to-Rail Input and Output Amplifier with Shutdown Option October 2006 LMV951 1V, 2.7 MHz, Rail-to-Rail Input and Output Amplifier with Shutdown Option General Description The LMV951 amplifier is capable of operating at supply voltages from 0.9V to 3V with guaranteed specs at 1V and 1.8V single supply. The input common mode range extends to both power supply rails without the offset glitch and input bias current phase reversal inherent to most rail to rail input amplifiers. Contrary to a conventional rail to rail output amplifier the LMV951 has a buffered output stage providing an open loop gain which is relatively unaffected by resistive output loading.
Published: |