Datasheet4U Logo Datasheet4U.com

LMV116 - Low Voltage / 45MHz / Rail-to-Rail Output Operational Amplifiers with Shutdown Option

Description

The LMV116 (single) rail-to-rail output voltage feedback amplifiers offer high speed (45MHz), and low voltage operation (2.7V) in addition to micro-power shutdown capability (LMV118).

Features

  • (VS = 2.7V, TA = 25˚C, RL = 1kΩ to V+/2, AV = +1. Typical values unless specified). n.
  • 3dB BW 45MHz n Supply voltage range 2.7V to 12V n Slew rate 40V/µs n Supply current 600µA n Power down supply current 15µA n Output short circuit current 32mA ± 20mA n Linear output current n Input common mode voltage.
  • 0.3V to 1.7V n Output voltage swing 20mV from rails n Input voltage noise 40nV/ n Input current noise 0.75pA/.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LMV116 LMV116/LMV118 Low Voltage 45MHz Rail-to-Rail Output Op Amp w/Shutdown Option (Rev. B) ETCTI
LMV112 LMV112 40 MHz Dual Clock Buffer (Rev. B) ETCTI
LMV115 GSM Baseband 30MHz 2.8V Oscillator Buffer Texas Instruments
LMV118 LMV116/LMV118 Low Voltage 45MHz Rail-to-Rail Output Op Amp w/Shutdown Option (Rev. B) ETCTI
LMV1012 LMV1012 Analog Series: Pre-Amplified IC for High Gain 2-Wire Microphones (Rev. H) ETCTI

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
LMV110 Fixed-Gain Amplifiers
LMV111 Operational Amplifier with Bias Network
LMV115 GSM Baseband 30MHz 2.8V Oscillator Buffer
LMV118 Low Voltage / 45MHz / Rail-to-Rail Output Operational Amplifiers with Shutdown Option
LMV101 Fixed-Gain Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LMV116/LMV118 Low Voltage, 45MHz, Rail-to-Rail Output Operational Amplifiers with Shutdown Option October 2003 LMV116/LMV118 Low Voltage, 45MHz, Rail-to-Rail Output Operational Amplifiers with Shutdown Option General Description The LMV116 (single) rail-to-rail output voltage feedback amplifiers offer high speed (45MHz), and low voltage operation (2.7V) in addition to micro-power shutdown capability (LMV118). Output voltage range extends to within 20mV of either supply rail, allowing wide dynamic range especially in low voltage applications. Even with low supply current of 600µA, output current capability is kept at a respectable ± 20mA for driving heavier loads.
Published: |