Datasheet4U Logo Datasheet4U.com

LMV1088 - Far Field Noise Suppression Microphone Amplifier

General Description

The LMV1088 is a fully analog dual input microphone array amplifier designed to reduce background acoustic noise, while delivering superb speech clarity in voice communications applications.

Key Features

  • Low power consumption Neglectable noise suppression processing delay Automatic Calibration Three microphone usage modes Space-saving 36 Bump micro SMD package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LMV1088 Dual Input Far Field Noise Suppression Microphone Amp w/Auto Cal (Rev. J) ETCTI
LMV1089 Dual Input Far Field Noise Suppression Microphone Amp w/ Auto Calibration (Rev. H) ETCTI
LMV1012 LMV1012 Analog Series: Pre-Amplified IC for High Gain 2-Wire Microphones (Rev. H) ETCTI
LMV1015 LMV1015 Analog Series: Built-in Gain IC for High Sensitivity 2-Wire Microphone (Rev. B) ETCTI
LMV1024 PDM Output with Pre-Amplifier Texas Instruments

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
LMV1089 Far Field Noise Suppression Microphone Amplifier
LMV101 Fixed-Gain Amplifiers
LMV1012 Pre-Amplified ICs for High Gain 2-Wire Microphones
LMV1015 Built-in Gain IC
LMV102 Fixed-Gain Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LMV1088 Dual Input, Far Field Noise Suppression Microphone Amplifier with Automatic Calibration Ability December 10, 2007 LMV1088 Dual Input, Far Field Noise Suppression Microphone Amplifier with Automatic Calibration Ability General Description The LMV1088 is a fully analog dual input microphone array amplifier designed to reduce background acoustic noise, while delivering superb speech clarity in voice communications applications. The LMV1088 incorporates calibration circuitry which may be www.DataSheet4U.com initiated by either an I2C command or by a logic level control on a separate input pin. The calibration sequence compensates for gain and frequency response variations of the microphones used with the LMV1088, eliminating the need to use expensive matched microphone sets.