Datasheet4U Logo Datasheet4U.com

LM95010 - Digital Temperature Sensor

Description

The LM95010 is a digital output temperature sensor that has single-wire interface compatible with National Semiconductor’s SensorPath interface.

It uses a ∆Vbe analog temperature sensing technique that generates a differential voltage that is proportional to temperature.

Features

  • n SensorPath Bus.
  • 4 hardware programmable addresses Block Diagram 20082001 SensorPath™ is a trademark of National Semiconductor Corporation. © 2003 National Semiconductor Corporation DS200820 www. national. com LM95010 Connection Diagram Ordering Information Order Number LM95010CIMM LM95010CIMMX 20082002 Package Marking T19C T19C NS Package Transport Number Media MUA08A 1000 units in tape and reel MUA08A 3500 units in tape and reel Pin.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM95010 Digital Temperature Sensor Texas Instruments
LM95071 SPI/MICROWIRE 13-Bit Plus Sign Temperature Sensor Texas Instruments
LM95071-Q1 SPI/MICROWIRE 13-Bit Plus Sign Temperature Sensor Texas Instruments
LM95172 13-Bit to 16-Bit Digital Temp Sensor Texas Instruments
LM95172-Q1 13-Bit to 16-Bit Digital Temp Sensor Texas Instruments

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
LM95071 SPI/MICROWIRE 13-Bit Plus Sign Temperature Sensor
LM95172 13-Bit To 16-Bit 200C Digital Temp Sensor
LM95172Q Digital Temperature Sensor
LM95213 2-Diode Input and Local Digital Temperature Sensor
LM95214 Quad Remote Diode and Local Temperature Sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM95010 Digital Temperature Sensor with SensorPath Bus in MSOP8 Package November 2003 LM95010 Digital Temperature Sensor with SensorPath™ Bus in MSOP8 Package General Description The LM95010 is a digital output temperature sensor that has single-wire interface compatible with National Semiconductor’s SensorPath interface. It uses a ∆Vbe analog temperature sensing technique that generates a differential voltage that is proportional to temperature. This voltage is digitized using a Sigma-Delta analog-to-digital converter. The LM95010 is part of a hardware monitor system, comprised of two parts: the PC System Health Controller (Master), such as a Super I/O, and up to seven slaves of which four can be LM95010s.
Published: |