Datasheet4U Logo Datasheet4U.com

LM2727 - N-Channel FET Synchronous Buck Regulator Controller

Description

The LM2727 and LM2737 are high-speed, synchronous, switching regulator controllers.

They are intended to control currents of 0.7A to 20A with up to 95% conversion efficiencies.

The LM2727 employs output over-voltage and undervoltage latch-off.

Features

  • The LM2737 and LM2737 operate from a low-current 5V bias and can convert from a 2.2V to 16V power rail. Both parts utilize a fixedfrequency, voltage-mode, PWM control architecture and the switching frequency is adjustable from 50kHz to 2MHz by adjusting the value of an external resistor. Current limit is achieved by monitoring the voltage drop across the onresistance of the low-side MOSFET, which enhances low duty-cycle operation. The wide range of operating frequencies gives the power supply d.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM2727 N-Channel FET Synchronous Buck Regulator Controller Texas Instruments
LM2720 High Frequency Multi-phase PWM Controller Texas Instruments
LM27213 Single Phase Hysteretic Buck Controller Texas Instruments
LM2722 High Speed Synchronous/Asynchronous MOSFET Driver Texas Instruments
LM27222 High-Speed 4.5A Synchronous MOSFET Driver Texas Instruments

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
LM2720 PWM Controller
LM2722 MOSFET Driver
LM27222 High-Speed 4.5A Synchronous MOSFET Driver
LM27241 Synchronous Buck Regulator Controller
LM2724A High Speed 3A Synchronous MOSFET Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM2727/LM2737 N-Channel FET Synchronous Buck Regulator Controller for Low Output Voltages June 2003 LM2727/LM2737 N-Channel FET Synchronous Buck Regulator Controller for Low Output Voltages General Description The LM2727 and LM2737 are high-speed, synchronous, switching regulator controllers. They are intended to control currents of 0.7A to 20A with up to 95% conversion efficiencies. The LM2727 employs output over-voltage and undervoltage latch-off. For applications where latch-off is not desired, the LM2737 can be used. Power up and down sequencing is achieved with the power-good flag, adjustable soft-start and output enable features. The LM2737 and LM2737 operate from a low-current 5V bias and can convert from a 2.2V to 16V power rail.
Published: |