Datasheet4U Logo Datasheet4U.com

ADC084S101 - 10-Bit A/D Converter

Description

The ADC104S101 is a low-power, four-channel CMOS 10-bit analog-to-digital converter with a high-speed serial interface.

Unlike the conventional practice of specifying performance at a single sample rate only, the ADC104S101 is fully specified over a sample rate range of 500 kSPS to 1 MSPS.

Features

  • n n n n Specified over a range of sample rates. Four input channels Variable power management Single power supply with 2.7V - 5.25V range Key Specifications n n n n DNL INL SNR Power Consumption.
  • 3V Supply.
  • 5V Supply +0.26/.
  • 0.16 LSB (typ) +0.4/.
  • 0.1 LSB (typ) 61.7 dB (typ) 3.9 mW (typ) 11.4 mW (typ).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADC084S101 8-Bit A/D Converter Texas Instruments
ADC084S021 4-Channel 50Ksps to 200Ksps 8-Bit A/D Converter Texas Instruments
ADC084S051 8-Bit A/D Converter Texas Instruments
ADC0844 8-Bit A/D Converter Texas Instruments
ADC0848 8-Bit A/D Converter Texas Instruments

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
ADC084S021 12-Bit A/D Converter
ADC0841 8-Bit P Compatible A/D Converter
ADC0844 8-Bit uP Compatible A/D Converters
ADC0848 8-Bit uP Compatible A/D Converters
ADC0800 ADC0800 8-Bit A/D Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ADC104S101 4 Channel, 1 MSPS, 10-Bit A/D Converter May 2005 ADC104S101 4 Channel, 1 MSPS, 10-Bit A/D Converter General Description The ADC104S101 is a low-power, four-channel CMOS 10-bit analog-to-digital converter with a high-speed serial interface. Unlike the conventional practice of specifying performance at a single sample rate only, the ADC104S101 is fully specified over a sample rate range of 500 kSPS to 1 MSPS. The converter is based on a successive-approximation register architecture with an internal track-and-hold circuit. It can be www.DataSheet4U.com configured to accept up to four input signals at inputs IN1 through IN4. The output serial data is straight binary, and is compatible with several standards, such as SPI™, QSPI™, MICROWIRE, and many common DSP serial interfaces.
Published: |