TDA9144 - I2C-bus controlled/ alignment-free PAL/NTSC/SECAM decoder/sync processor with PALplus helper demodulator

NXP

The TDA9144 by NXP is a I2C-bus controlled/ alignment-free PAL/NTSC/SECAM decoder/sync processor with PALplus helper demodulator. Below is the official datasheet preview.

📥 Download Datasheet

TDA9144 I2C-bus controlled/ alignment-free PAL/NTSC/SECAM decoder/sync processor with PALplus helper demodulator by NXP - Datasheet Preview — Official preview page of the **TDA9144** I2C-bus controlled/ alignment-free PAL/NTSC/SECAM decoder/sync processor with PALplus helper demodulator datasheet (NXP).

Datasheet Details

Part number	TDA9144
Manufacturer	NXP
File Size	309.40 KB
Description	I2C-bus controlled/ alignment-free PAL/NTSC/SECAM decoder/sync processor with PALplus helper demodulator
Datasheet	TDA9144_PhilipsSemiconductors.pdf
Additional preview pages of the TDA9144 datasheet.

TDA9144 Product details

Description

plastic shrink dual in-line package; 32 leads (400 mil) GENERAL DESCRIPTION TDA9144 The TDA9144 is an I2C-bus controlled, alignment-free PAL/NTSC/SECAM decoder/sync processor with helper demodulator for PALplus signals and blanking facilities for PALplus and EDTV-2 signals.The TDA9144 has been designed for use with baseband chrominance delay lines, and has a combined subcarrier frequency/comb filter enable signal for communication with a PAL/NTSC comb filter.The IC can process both CVBS inpu

Features

Multi-standard colour decoder and sync processor for PAL, NTSC and SECAM.
PALplus helper demodulator.
PALplus helper blanking and EDTV-2 blanking.
I2C-bus controlled.
I2C-bus addresses hardware selectable.
Pin compatible with TDA9141.
Alignment free.
Few external components.
Designed for use with baseband delay lines.
Integrated video filters.
Adjustable luminance delay.
Noise detector wi.

📁 TDA9144 Similar Datasheet

TDA9102C - H/V PROCESSOR FOR TTL V.D.U (ST Microelectronics)
TDA9102F - H/V PROCESSOR FOR TTL V.D.U (ST Microelectronics)
TDA9102T - H/V PROCESSOR FOR TTL V.D.U (ST Microelectronics)
TDA9103 - DEFLECTION PROCESSOR FOR MULTISYNC MONITOR (ST Microelectronics)
TDA9105 - DEFLECTION PROCESSOR FOR MULTISYNC MONITORS (ST Microelectronics)
TDA9105A - DEFLECTION PROCESSOR FOR MULTISYNC MONITORS (ST Microelectronics)
TDA9106 - LOW COST DEFLECTION PROCESSOR FOR MULTISYNC MONITORS (ST Microelectronics)
TDA9106A - LOW COST DEFLECTION PROCESSOR FOR MULTISYNC MONITORS (ST Microelectronics)

Other Datasheets by NXP

TDA9141 - PAL/NTSC/SECAM decoder/sync processor
TDA9143 - I2C-bus controlled/ alignment-free PAL/NTSC/SECAM decoder/sync processor
TDA9150B - Programmable deflection controller
TDA9151B - Programmable deflection controller
TDA9160 - PAL/NTSC/SECAM decoder/sync processor
TDA9170 - YUV picture improvement processor based on histogram modification

Published: Apr 16, 2005 |