TDA8784 - 18 Msps/ 10-bit analog-to-digital interface for CCD cameras

NXP

The TDA8784 by NXP is a 18 Msps/ 10-bit analog-to-digital interface for CCD cameras. Below is the official datasheet preview.

Datasheet Details

Part number	TDA8784
Manufacturer	NXP
File Size	112.74 KB
Description	18 Msps/ 10-bit analog-to-digital interface for CCD cameras
Datasheet	TDA8784_PhilipsSemiconductors.pdf
Additional preview pages of the TDA8784 datasheet.

plastic low proﬁle quad ﬂat package; 48 leads; body 7 × 7 × 1.4 mm APPLICATIONS CCD camera systems.

Correlated Double Sampling (CDS), AGC, 10-bit ADC and reference regulator included, adjustable bandwidth (CDS and AGC).
Fully programmable via a 3-wire serial interface.
Sampling frequency up to 18 MHz.
AGC gain from 4.5 to 34.5 dB (in 0.1 dB steps).
CDS programmable bandwidth from 4 to 120 MHz.
AGC programmable bandwidth from 4 to 54 MHz.
Standby mode available for each block for power saving.

📁 TDA8784 Similar Datasheet

TDA8715 - 8-Bit High-Speed Analog-to-Digital Converter (Philips)
TDA8777 - Triple 10-bit video DAC up to 330 MHz sample frequency (NXP Semiconductors)
TDA8025 - IC card interface (NXP Semiconductors)
TDA8035HN - Smart card interface (NXP Semiconductors)
TDA8060ATS - Satellite ZERO-IF QPSK down-converter (Philips)
TDA8102B - H/V Processor for TTL VDU (ST Microelectronics)
TDA8114 - VCR Processor Interface Circuit (ST Microelectronics)
TDA8115 - Dual Motor Driver (ST Microelectronics)

Other Datasheets by NXP

TDA8780M - True logarithmic amplifier
TDA8783 - 40 Msps/ 10-bit analog-to-digital interface for CCD cameras
TDA8785 - 8-bit high-speed analog-to-digital converter with gain and offset controls
TDA8786 - 10-bit analog-to-digital interface for CCD cameras
TDA8786A - 10-bit analog-to-digital interface for CCD cameras
TDA8787 - 10-bit/ 3.0 V analog-to-digital interface for CCD cameras

Published: Apr 16, 2005 |