Datasheet4U Logo Datasheet4U.com

TDA1310A - Stereo Continuous Calibration DAC CC-DAC

Description

The TDA1310A is a device of a new generation of Digital-to-Analog Converters (DACs) which embodies the innovative technique of Continuous Calibration.

The largest bit-currents are repeatedly generated by one single current reference source.

Features

  • Space saving package DIL8 or SO8.
  • Low power consumption.
  • Wide dynamic range (16-bit resolution).
  • Continuous Calibration (CC) concept.
  • Easy.

📥 Download Datasheet

📁 Similar Datasheet

  • TDA10023HT - Single chip DVB-C/MCNS channel receiver (Philips)
  • TDA1002A - Recording and Playback Amplifier (ETC)
  • TDA1003A - Motor Regulator and Bias/Erase Oscillator Circuit (Philips)
  • TDA10046HT - Single-Chip DVB-T Channel Decoder (Philips)
  • TDA1006A - MOTOR REGULATOR WITH AUTOMATIC TAPE END INDICATOR (ETC)
  • TDA1010A - Audio Power Output (ETC)
  • TDA1013 - 4W audio power amplifier (ETC)
  • TDA1013A - Audio Power Output (ETC)
  • TDA1022 - BUCKET BRIGADE DELAY LINE (ETC)
  • TDA1023 - Proportional-control triac (Philips)
Other Datasheets by NXP
  • TDA1311A - Stereo Continuous Calibration DAC CC-DAC
  • TDA1312A - Stereo continuous calibration DAC CC-DAC
  • TDA1312AT - Stereo continuous calibration DAC CC-DAC
  • TDA1313 - Stereo continuous calibration DAC CC-DAC
  • TDA1313T - Stereo continuous calibration DAC CC-DAC
  • TDA1314T - Quadruple filter DAC
  • TDA1315H - Digital audio input/output circuit DAIO
  • TDA1318 - DCC read amplifier

Full PDF Text Transcription

Click to expand full text
INTEGRATED CIRCUITS DATA SHEET TDA1310A Stereo Continuous Calibration DAC (CC-DAC) Preliminary specification Supersedes data of TDA1310; TDA1310T July 1993 File under Integrated Circuits, IC01 May 1994 Philips Semiconductors Philips Semiconductors Preliminary specification Stereo Continuous Calibration DAC (CC-DAC) FEATURES • Space saving package DIL8 or SO8 • Low power consumption • Wide dynamic range (16-bit resolution) • Continuous Calibration (CC) concept • Easy application: – Single 3 to 5 V supply rail – Output current and bias current are proportional to the supply voltage • Fast settling time permits 2×, 4× and 8× oversampling (serial input) or double speed operation at 4× oversampling • Internal bias current ensures maximum dynamic range • Wide operating temperature range (-40
Published: |