Datasheet4U Logo Datasheet4U.com

SSL21083AT - Compact non-dimmable LED driver

Description

The SSL21083AT is a high-voltage Integrated Circuit (IC) for driving LED lamps in general mains non-dimmable lighting applications.

Small Printed-Circuit Board (PCB) footprint; compact solution High efficiency (up to 95 %) Ease of integration

Features

  • LED driver ICs for driving LED strings from a rectified mains supply.
  • High-efficiency switch mode buck driver product family:.
  • drivers with integrated 600 V (DC) power switches.
  • Controller with power-efficient boundary conduction mode of operation with:.
  • No reverse recovery losses in freewheel diode.
  • Zero Current Switching (ZCS) for turn-on of switch.
  • Zero voltage or valley switching for turn-on of switch.
  • Minimal required inductance value and size.

📥 Download Datasheet

📁 Similar Datasheet

  • SSL21083 - Compact non-dimmable LED driver (Silergy)
  • SSL21083T - GreenChip drivers (NXP Semiconductors)
  • SSL21083T - Compact non-dimmable LED driver (Silergy)
  • SSL21081 - Compact non-dimmable LED driver (Silergy)
  • SSL21081AT - Compact non-dimmable LED driver (Silergy)
  • SSL21081T - GreenChip drivers (NXP Semiconductors)
  • SSL21082AT - Mains dimmable LED driver (Silergy)
  • SSL21082T - GreenChip drivers (NXP Semiconductors)
  • SSL21084T - GreenChip drivers (NXP Semiconductors)
  • SSL2101 - SMPS (NXP Semiconductors)
Other Datasheets by NXP

Full PDF Text Transcription

Click to expand full text
SSL21083AT Compact non-dimmable LED driver IC Rev. 6 — 4 October 2013 Product data sheet 1. General description The SSL21083AT is a high-voltage Integrated Circuit (IC) for driving LED lamps in general mains non-dimmable lighting applications. The main benefits are: • Small Printed-Circuit Board (PCB) footprint; compact solution • High efficiency (up to 95 %) • Ease of integration • Low electronic Bill Of Material (BOM) The IC incorporates a 600 V MOSFET. The IC works as boundary conduction mode converters, typically in buck configuration. It has been designed to start up directly from the HV supply by an internal high-voltage current source. Thereafter, the dV/dt supply is used with capacitive coupling from the drain or any other auxiliary supply.
Published: |