AFLP5G35645 Datasheet - NXP

AFLP5G35645 3.6GHz Low Power Amplifier

Pin Number Pin Function Pin Description 1, 2, 4, 8, 10, 11, 12, 13, 15, 16, 17 GND Ground 3 RFin RF Input 5 EN Bias Enable/Disable 6 LLS Logic Level Select Note: 7 VCC1 Power Supply for Controller 9 RFout RF Output 14 VCC2 Power Supply for the RF Pre *driver LLS = 0 .

NXP Semiconductors Technical Data 3.6 GHz Low Power Amplifier Module High Efficiency Pre Driver The AFLP5G35645 is an integrated multi chip module. It consists of three stages of amplification and support circuitry to work at 3.3 V or 5 V with very low power consumption. The amplifier includes a 1.8 V logic control pin for bias enable/disable TDD operation. Typical Performance: VCC1 = 3.3 Vdc, VCC2 = 5 Vdc Frequency Gps (dB) ICC (mA) 3400 MHz 30.6 32 3500 MHz 31.5.

AFLP5G35645 Features

* Frequency: 3400

* 3800 MHz

* 3.3 V or 5 V supply for RF amplifier

* P1dB: 25 dBm @ 3600 MHz, VCC2 = 3.3 Vdc

* P1dB: 29 dBm @ 3600 MHz, VCC2 = 5 Vdc

* Power consumption:

* 114 mW @ VCC2 = 3.3 Vdc

* 168 mW @ VCC2 = 5 Vdc

* Fully matched (50 ohm input/out

AFLP5G35645 Datasheet (378.63 KB)