CBTV4010 Datasheet - NXP Semiconductors

CBTV4010 10-bit DDR SDRAM mux/bus switch

This 10-bit bus switch is designed for 2.3 V to 2.7 V VCC operation and SSTL_2 select input levels. Each Host port pin is multiplexed to one of four DIMM port pins. When the S pin is low the corresponding 10-bit bus switch is turned on. The on-state connects the Host port to the DIMM port through a .

CBTV4010 Features

* Enable signal is SSTL_2 compatible

* Optimized for use in Double Data Rate (DDR) SDRAM applications

* Designed to be used with 400 Mbps/200 MHz DDR data bus

* Switch on resistance is designed to eliminate the need for series resistor to DDR SDRAM

* 20 Ω on r

CBTV4010 Datasheet (108.77 KB)