NSD7310A - Brushed DC Motor Driver

Product Overview

NOVOSENSE

Datasheet Details

Part number	NSD7310A
Manufacturer	NOVOSENSE
File Size	693.43 KB
Description	Brushed DC Motor Driver
Datasheet	NSD7310A Datasheet
Additional preview pages of the NSD7310A datasheet.

Product details

Description

SYMBOL No TYPE DESCRIPTION IPROBE 1 O Current feedback output pin, Put external resistor on this pin to ground.See application information section for resistor selection IN1 3 I Logic inputs.Controls the H-bridge output.Has internal pull downs.IN2 2 I Logic inputs.Controls the H-bridge output.Has internal pull downs.PGND 7 PWR High-current ground path.connect directly to board ground.OUT1 6 O H-bridge output1 pin.Connect directly to the motor or other inductive load.OUT2 8 O

Features

sleep mode with low quiescent current when both IN1 and IN2 inputs are low. The device is integrated with current chopping regulation, depends on VREF input and the voltage of IPROBE pin, which is proportional to the current output of the integrated current mirror of the current flowing through motor and IPROBE output resistor. The current chopping function limits the current during motor start-up or stall condition. The device is also fully protected from faults including VM undervoltage, overc.

📁 Similar Datasheet

NSD-1202 - Dual Piezo Motor Driver IC (austriamicrosystems AG)
NSD-2101 - Piezo Motor Driver ASIC (austriamicrosystems AG)
NSD03A10 - DIODE (Nihon Inter Electronics)
NSD03A20 - DIODE (Nihon Inter Electronics)
nsd03a40 - Standard Recovery Diode (Nihon Inter Electronics)
NSD070AL - Switching Diode (ON Semiconductor)
NSD10-12D12 - DC-DC Converters (FranMar)
NSD10-12D15 - DC-DC Converters (FranMar)

Other Datasheets by NOVOSENSE

NSD7310 - Brushed DC Motor Driver
NSD7312 - Brushed DC Motor Driver
NSD7312A - Brushed DC Motor Driver
NSD1025-Q1 - Low-Side Gate Driver
NSD1624-Q1 - Half Bridge Gate Driver
NSD16241-Q1 - Half Bridge Gate Driver

Published: Aug 25, 2024 |