TDA1085C - UNIVERSAL MOTOR SPEED CONTROLLER

Motorola

Datasheet Details

Part number	TDA1085C
Manufacturer	Motorola
File Size	170.07 KB
Description	UNIVERSAL MOTOR SPEED CONTROLLER
Datasheet	TDA1085C_MotorolaInc.pdf

The TDA 1085C triggers a triac accordingly to the speed regulation requirements.

or speed will have high acceleration, excluding the time for V Pin 4 to go from V Pin 6 to two times this value, high acceleration again, up to the moment the motor has reached the set speed value, at which it will stay, see Figure 3. Should a reset happen (whatever the cause would be), the above mentioned successive ramps will be fully reprocessed from 0 to the maximum speed. If VPin 6 = 0, only the high acceleration ramp occurs. To get a real zero speed position, Pin 5 has been designed in suc.

📁 TDA1085C Similar Datasheet

TDA1082 - East-West correction driver circuit (NXP)
TDA1083 - One Chip AM/FM Radio with Audio Power Amplifier (TEMIC Semiconductors)
TDA1001B - Interference and noise suppression circuit for FM receivers (NXP)
TDA1001BT - Interference and noise suppression circuit for FM receivers (NXP)
TDA10021HT - DVB-C channel receiver (NXP)
TDA10023HT - Single chip DVB-C/MCNS channel receiver (Philips)
TDA10025HN - Dual cable demodulator (NXP)
TDA1002A - Recording and Playback Amplifier (ETC)

Other Datasheets by Motorola

Published: Apr 23, 2005 |