MMBFU310LT1 - JFET Transistor

Product Overview

Motorola

Part number	MMBFU310LT1
Manufacturer	Motorola
File Size	161.76 KB
Description	JFET Transistor
Datasheet	MMBFU310LT1 Datasheet
Additional preview pages of the MMBFU310LT1 datasheet.

g from preheating to soldering, the maximum temperature gradient shall be 5°C or less.
After soldering has been completed, the device should be allowed to cool naturally for at least three minutes. Gradual cooling should be used as the use of forced cooling will increase the temperature gradient and result in latent failure due to mechanical stress.
Mechanical stress or shock should not be applied during cooling.
Soldering a device without preheating can cause excessive.

📁 Similar Datasheet

Other Datasheets by Motorola

Published: May 9, 2005 |