MC33794 - Electric Field Imaging Device

Product Overview

Motorola

Datasheet Details

Part number	MC33794
Manufacturer	Motorola
File Size	491.03 KB
Description	Electric Field Imaging Device
Datasheet	MC33794 Datasheet
Additional preview pages of the MC33794 datasheet.

Product details

Description

Pin 1 2, 5, 27, 43 3 Pin Name VCC NC AGND Formal Name 5.0 V Regulator Output No connect Analog Ground Definition This output pin requires a 47 µF capacitor and provides a regulated 5.0 V for the MCU and for internal needs of the 33794.

Features

Supports up to 9 Electrodes and 2 References.
Shield Driver for Driving Remote Electrodes Through Coaxial Cables.
+5.0 V Regulator to Power External Circuit.
ISO-9141 Physical Layer Interface.
Lamp Driver Output.
Watchdog and Power ON Reset Timer.
Critical Internal Nodes Scaled and Selectable for Measurement.
High-Purity Sine Wave Generator Tunable with External Resistor 33794.

📁 Similar Datasheet

MC33790 - Two Channel Distributed System Interface (DSI) Physical Interface Device (NXP)
MC33793 - Distributed System Interface (DSI) Sensor Interface (NXP)
MC33793A - Distributed System Interface (DSI) Sensor Interface (Freescale Semiconductor)
MC33797 - Four Channel Squib Driver (Freescale Semiconductor)
MC3372 - Low Power Narrowband FM IF (LANSDALE Semiconductor)
MC33730 - Switch Mode Power-Supply (NXP)
MC33761 - Ultra Low-Noise Low Dropout Voltage Regulator (ON Semiconductor)
MC33762 - Dual Ultra Low-Noise Low Dropout Voltage Regulator (ON Semiconductor)

Other Datasheets by Motorola

MC33702 - Microprocessor Power Supply
MC3370P - Zero Voltage Switch
MC3371 - (MC3372) LOW POWER FM IF
MC3373 - Remote Control Amplifier/Detector
MC3374 - LOW VOLTAGE SINGLE CONVERSION FM RECEIVER
MC33742 - System Basis Chip (SBC) with Enhanced High-Speed CAN Transceiver

Published: Jun 8, 2005 |