Datasheet4U Logo Datasheet4U.com

MC10EL15 - 1:4 Clock Distribution Chip

Download the MC10EL15 datasheet PDF. This datasheet also covers the MC100EL15 variant, as both devices belong to the same 1:4 clock distribution chip family and are provided as variant models within a single manufacturer datasheet.

Features

  • a multiplexed clock input to allow for the distribution of a lower speed scan or test clock along with the high speed system clock. When LOW (or left open and pulled LOW by the input pulldown resistor) the SEL pin will select the differential clock input. The common enable (EN) is synchronous so that the outputs will only be ena.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MC100EL15-Motorola.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MC10EL15 5V ECL 1:4 Clock Distribution Chip ON Semiconductor
MC10EL11 1:2 Differential Fanout Buffer ON Semiconductor
MC10EL12 Low Impedance Driver ON Semiconductor
MC10EL16 Differential Receiver ON Semiconductor
MC10EL01 5V ECL 4-Input OR/NOR onsemi

Other Datasheets by Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
MC10EL11 1:2 Differential Fanout Buffer
MC10EL12 Low Impedance Drive
MC10EL16 Differential Receiver
MC10EL01 4-input OR/NOR
MC10EL04 2-input AND/NAND

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MOTOROLA SEMICONDUCTOR TECHNICAL DATA 1:4 Clock Distribution Chip The MC10EL/100EL15 is a low skew 1:4 clock distribution chip designed explicitly for low skew clock distribution applications. The device can be driven by either a differential or single-ended ECL or, if positive power supplies are used, PECL input signal. If a single-ended input is to be used the VBB output should be connected to the CLK input and bypassed to ground via a 0.01µF capacitor. The VBB output is designed to act as the switching reference for the input of the EL15 under single-ended input conditions, as a result this pin can only source/sink up to 0.5mA of current. The EL15 features a multiplexed clock input to allow for the distribution of a lower speed scan or test clock along with the high speed system clock.
Published: |