Datasheet4U Logo Datasheet4U.com

MC10129 - Quad Bus Receiver

Download the MC10129 datasheet PDF. This datasheet also covers the MC10129L variant, as both devices belong to the same quad bus receiver family and are provided as variant models within a single manufacturer datasheet.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MC10129L_MotorolaInc.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MC10121 4-Wide OR-AND/OR-AND Gate ON Semiconductor
MC10123 Triple 4-3-3-Input Bus Driver ON Semiconductor
MC10124 Quad TTL to MECL Translator ON Semiconductor
MC10125 Quad MECL to TTL Translator ON Semiconductor
MC10101 Quad OR/NOR Gate ON Semiconductor

Other Datasheets by Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
MC10121 4-Wide OR-AND/OR-AND Gate
MC10123 Triple 4-3-3-Input Bus Driver
MC10124 Quad TTL to MECL Translator
MC10125 Quad MECL to TTL Transistor
MC10101 Quald OR/NOR Gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MOTOROLA SEMICONDUCTOR TECHNICAL DATA Quad Bus Receiver The MC10129 data inputs are compatible with, and accept TTL logic levels as well as levels compatible with IBM–type buses. The clock, strobe, and reset inputs accept MECL 10,000 logic levels. The data inputs accept the bus levels, and storage elements are provided to yield temporary latch storage of the information after receiving it from the bus. The outputs can be strobed to allow accurate synchronization of signals and/or connection to MECL 10,000 level buses. When the clock is low, and the reset input is disabled, the outputs will follow the D inputs. The latches will store the data on the rising edge of the clock. The outputs are enabled when the strobe input is high. Unused D inputs must be tied to VCC or Gnd.
Published: |