Datasheet4U Logo Datasheet4U.com

MF0064M-07BTXX - 8/16-bit Data Bus Flash ATA PC Card

Description

Mitsubishi’s Flash ATA cards provide large memory capacities on a device approximately the size of a credit card (85.6mm(L) × 54mm(W) × 3.3mm(T) or 5mm(T)).

The cards use an 8/16 bit data bus.

Features

  • 68pin PC Card Standard Type-I (up to 512MB) and.
  • Single 5V or 3.3V Supply.
  • Card density of up to 640MB maximum.
  • Four PC Card ATA and IDE ATA modes.
  • Nonvolatile, No Batteries Required.
  • High reliability based on internal ECC function.
  • Fast read/write performance(Target) Read: 5MB/s(max. ) Write: 1.0MB/s(max. ) (64MB) 2.0MB/s(max. ) (128MB) 3.0MB/s(max. ) (others) 100,000 program/erase cycles Type-II(640MB) PC Card.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MF0204 (MFxxxx Series) Metal Film Resistors ASJ
MF0204 (MF0207) Metal Film Resistors Yageo
MF0204 (MF0207) Metal Film Resistors VTM
MF0AES2000DA8 MIFARE Ultralight AES contactless limited-use IC NXP
MF0AES2001DUD MIFARE Ultralight AES contactless limited-use IC NXP

Other Datasheets by Mitsubishi Electric

Part Number Description
MF0064M-07ATXX 8/16-bit Data Bus Flash ATA PC Card
MF0064M-04AAxx 8/16-bit Data Bus CompactFlash Card
MF0064M-04BAXX 8/16-bit Data Bus CompactFlash Card
MF0064M-05AAxx 8/16-bit Data Bus CompactFlash Card
MF0064M-11ATxx 8/16-bit Data Bus Flash ATA PC Card

Full PDF Text Transcription

Click to expand full text
MITSUBISHI STORAGE CARD ATA PC CARDS 8/16-bit Data Bus Flash ATA PC Card MF0064M-07BTxx MF0128M-07BTxx MF0256M-07BTxx MF0512M-07BTxx MF0640M-07BFxx Connector Type Two-piece 68-pin DESCRIPTION Mitsubishi’s Flash ATA cards provide large memory capacities on a device approximately the size of a credit card (85.6mm(L) × 54mm(W) × 3.3mm(T) or 5mm(T)). The cards use an 8/16 bit data bus. Available in 64MB, 128MB, 256MB, 512MB and 640MB capacities, Mitsubishi’s Flash ATA cards conform to the JEIDA/PCMCIA standard. In default mode, the ATA card operates in PC Card compliant sockets. It conforms to PCMCIA 2.1,JEIDA 4.2 and PC Card Standard. When the OE# signal is asserted low level by the Host system in power on cycle, the Mitsubishi’s Flash ATA cards can be selected in a IDE ATA interface.
Published: |