Description
Pin SW (Pin 1) Description
This pin is the power side of the external inductor and must be connected to the external Schottky diode.It provides the output current to the load.Since the boost converter operates in a current loop mode, the output voltage can range up to 16V but shall not exceed this limit.This pin is the system ground for the ML0308 and carries both the power and the analog signals.High quality ground must be provided to avoid spikes and/or uncontrolled operation.Care must be
Features
- z Inherently-matched LED current z Drives up to four white LEDs from 3.6V supply z Automatic soft-start z Output overvoltage protection z High efficiency.
ML0308 Datasheet
