Datasheet4U Logo Datasheet4U.com

ME2101A33 - Step-up DC-DC Converter

Download the ME2101A33 datasheet PDF. This datasheet also covers the ME2101 variant, as both devices belong to the same step-up dc-dc converter family and are provided as variant models within a single manufacturer datasheet.

Features

  • Small number of external components: only an inductor, a diode and a capacitor；.
  • Low ripple and low noise；.
  • Operating voltage range：0.9V~6.5V；.
  • Output voltage range：2.0V~5.0V(step 0.1V)；.
  • Output voltage accuracy：±2.5%；.
  • Output Current：if Vin=3.0V and Vout=3.3V，then Iout=350mA；.
  • Low start voltage：≤0.9V(at Iout=1mA)；.
  • Maximum oscillator frequency： 100KHz(Typ. )；.
  • High Efficiency：87%(Type)；.
  • Slow-Start Time ：.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (ME2101-Microne.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number ME2101A33
Manufacturer Microne
File Size 266.67 KB
Description Step-up DC-DC Converter
Datasheet download datasheet ME2101A33 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ME2108 PFM Step-up DC/DC Converter ChipSourceTek
ME2113B BLUE SIDE BACKLIGHT Micro Electronics
ME2149 ULTRA-SMALL PACKAGE PWM/PFM SWITCHING CONTROL STEP-UP SWITCHING REGULATOR ChipSourceTek
ME2159 1A Step-Up Current Mode PWM Converter ChipSourceTek
ME2169 PWM/PFM switch controller ChipSourceTek

Other Datasheets by Microne

Part Number Description
ME2101A30 Step-up DC-DC Converter
ME2101A50 Step-up DC-DC Converter
ME2101 Step-up DC-DC Converter
ME2100 DC / DC boost converter
ME2100A33 DC / DC boost converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ME2101 Series Ver 02 ME2101 Series Step-up DC-DC Converter ME2101 Series is a PWM Step-up DC/DC converter IC with low supply current by CMOS process. High frequency noise that occurs during switching is reduced by using advanced circuit designed, output voltage is programmable in 0.1V steps between 2.0~5.0V and maximum frequency is 100KHz(Typ.). A low ripple, high efficiency step-up DC/DC converter can be constructed of ME2101AxxX with only three external components. Also available is a CE(chip enable) function that reduce power dissipation During shut-down mode., and an independent Vdd pin function (separated power supply and voltage detect pins) for fly-back circuits.
Published: |