Datasheet4U Logo Datasheet4U.com

MICRF620 - 434MHz ISM Band Transceiver Module

Description

The MICRF620 is a self-contained frequency shift keying (FSK) transceiver module, intended for use in half-duplex, bidirectional RF links.

Features

  • “Drop in” RF solution Small size: 11.5x14.1mm RF tested Low Power Surface Mountable Tape & Reel Digital Bit Synchronizer Received Signal Strength Indicator (RSSI) RX and TX power management Power down function Register read back function.

📥 Download Datasheet

Datasheet Details

Part number MICRF620
Manufacturer Micrel Semiconductor
File Size 292.82 KB
Description 434MHz ISM Band Transceiver Module
Datasheet download datasheet MICRF620 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MICRF114 Low-Power Integrated Sub-GHz Wireless RF Transmitter Microchip
MICRORAM Output Ripple Attenuation Module Vicor Corporation
MICROSMD050 Poly Switch PTC Devices Tyco
microSMD190LR Low Rho SMD Littelfuse
microSMD200LR Low Rho SMD Littelfuse

Other Datasheets by Micrel Semiconductor

Part Number Description
MICRF600 902-928MHz ISM Band Transceiver Module
MICRF610 868-870 MHz ISM Band Transceiver Module
MICRF001 QwikRadiotm Receiver/Data Demodulator Advance Information
MICRF002 QwikRadiotm Low Power UHF Receiver Preliminary Information
MICRF003 QwikRadiotm 900 MHz UHF Receiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com MICRF620 434MHz ISM Band Transceiver Module General Description The MICRF620 is a self-contained frequency shift keying (FSK) transceiver module, intended for use in half-duplex, bidirectional RF links. The multi-channeled FSK transceiver module is intended for UHF radio equipment in compliance with the European Telecommunication Standard Institute (ETSI) specification, EN300 220. The transmitter consists of a fully programmable PLL frequency synthesizer and power amplifier. The frequency synthesizer consists of a voltage-controlled oscillator (VCO), a crystal oscillator, dual modulus prescaler, programmable frequency dividers, and a phase-detector. The output power of the power amplifier can be programmed to seven levels.
Published: |