Datasheet4U Logo Datasheet4U.com

MIC2782 - Dual-Input Push Button Reset

Description

The MIC2782 is a two input, two output push-button reset IC.

It will generate a reset pulse for a factory-programmed reset timeout period after both manual reset inputs have been held to a logic-low for the factory-programmed setup period.

Features

  • 65kΩ internal pull-up resistors on both of the inputs (/MR1 and /MR2). The device offers factory programmed setup periods of 6s, 8s, 10s, or 12s and reset timeout periods of 0.5s, 1s or 2s. It is available in a space saving, 6-bump, 0.4mm pitch, 0.8mm × 1.2mm wafer level chip scale package. Data sheets and support documentation can be found on Micrel’s web site at: www. micrel. com. Features.
  • 1.5V t.

📥 Download Datasheet

Datasheet Details

Part number MIC2782
Manufacturer Micrel Semiconductor
File Size 467.43 KB
Description Dual-Input Push Button Reset
Datasheet download datasheet MIC2782 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MIC2785 Dual Supply Voltage Monitor MICREL
MIC2788 Push-Button Reset MICREL
MIC2789 Push-Button Reset MICREL
MIC27600 36V / 7A Hyper Speed Control Synchronous DC-DC Buck Regulator MICREL
MIC2772 Dual Voltage Supervisor MICREL

Other Datasheets by Micrel Semiconductor

Part Number Description
MIC2753 Power Supply Supervisors
MIC2754 Power Supply Supervisors
MIC2755 Battery System Supervisor Preliminary Information
MIC2774 Dual Micro-Power Low Voltage Supervisor
MIC2775 Micro-Power Voltage Supervisor

Full PDF Text Transcription

Click to expand full text
MIC2782 Dual-Input Push Button Reset IC with Immediate and Delayed Outputs General Description The MIC2782 is a two input, two output push-button reset IC. It will generate a reset pulse for a factory-programmed reset timeout period after both manual reset inputs have been held to a logic-low for the factory-programmed setup period. The MIC2782 also has an ANDOUT logic output which will activate if both inputs are held low for longer than a debounce time (1.5ms), and deactivate if one or both inputs are released for longer than a debounce time (1.5ms). The RESET and ANDOUT outputs are active-low, open-drain NMOS outputs. The MIC2782 operates over the 1.5V to 5.5V supply voltage range, consuming 2.2µA of supply current at 3.3V.
Published: |