MAX14778 - Dual +-25V Above- and Below-the-Rails 4:1 Analog Multiplexer

Product Overview

Maxim

Part number	MAX14778
Manufacturer	Maxim
File Size	444.42 KB
Description	Dual +-25V Above- and Below-the-Rails 4:1 Analog Multiplexer
Datasheet	MAX14778 Datasheet
Additional preview pages of the MAX14778 datasheet.

The MAX14778 dual 4:1 analog multiplexer supports analog signals up to Q25V with a single 3.0 to 5.5V supply.

a low 1.5I (max) on-resistance and 3mI (typ) flatness to maximize signal integrity over the entire common-mode voltage range. Each multiplexer can carry up to 300mA of continuous current through the multiplexer in either direction. The MAX14778 supports switching of full-speed USB 1.1 signals (12Mbps) and RS-485 data rates of up to 20Mbps. The MAX14778 is available in a 20-pin (5mm x 5mm) TQFN package and is specified over the -40NC to +85NC extended temperature range. S ±25V Signal Range S Si.

📁 Similar Datasheet

MAX14770E - High-ESD Profibus RS-485 Transceiver (Maxim Integrated Products)
MAX1471 - 3V/5V ASK/FSK Superheterodyne Receiver (Maxim Integrated Products)
MAX14720 - Power-Management Solution (Maxim Integrated)
MAX14724 - Serial-Controlled 8:4 Matrix Switch Multiplexer (Maxim Integrated)
MAX1473 - ASK Superheterodyne Receiver (Maxim Integrated Products)
MAX1474 - Miniature Electronically Trimmable Capacitor (Maxim Integrated Products)
MAX14745 - PMIC (Maxim Integrated)
MAX14750 - Power-Management Solution (Maxim Integrated)

Other Datasheets by Maxim

MAX14777 - Quad Beyond-the-Rails -15V to +35V Analog Switch
MAX147 - +2.7Low-Power / 8-Channel / Serial 12-Bit ADCs
MAX1470 - 315MHz Low-Power / +3V Superheterodyne Receiver
MAX1472 - Crystal-Based ASK Transmitter
MAX1478 - 1% Accurate / Digitally Trimmed /Rail-to-Rail Sensor Signal Conditioner
MAX1479 - 300MHz to 450MHz Low-Power / Crystal-Based +10dBm ASK/FSK Transmitter

Published: Dec 6, 2013 |