Datasheet4U Logo Datasheet4U.com

MAX3055 - Fault-Protected/Tolerant CAN Transceiver

Description

The MAX3054/MAX3055/MAX3056 are interfaces between the protocol controller and the physical wires of the bus lines in a controller area network (CAN).

The devices provide differential transmit capability and switch to single-mode if certain fault conditions occur.

Features

  • ±80V Fault Protection.
  • Low RFI/Excellent EMC Immunity.
  • Full Wake-Up Capability During Failure Modes.
  • Bus Failure Management.
  • Support Single-Wire Transmission Mode with Ground Offset Voltages Up to 1.5V.
  • Thermally Protected.
  • Do Not Disturb the Bus Line when Unpowered.
  • Low-Current Sleep and Standby Mode with Wake-Up Through Bus Lines.
  • Up to 250kbps Data Rate (MAX3054).
  • Pin and Functionally Compatib.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX3050 Low-Supply Current CAN Transceivers Maxim
MAX3051 Low-Supply-Current CAN Transceiver Maxim
MAX3053 Low Supply Current CAN Transceiver Maxim
MAX3054 Fault-Protected/Tolerant CAN Transceiver Maxim
MAX3057 Low-Supply Current CAN Transceivers Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX305 High-Speed Analog Switches
MAX3056 Fault-Protected/Tolerant CAN Transceiver
MAX3058 Low Supply Current CAN Transceivers
MAX3059 Low Supply Current CAN Transceivers
MAX30001 Single-Channel Integrated Biopotential and Bioimpedance AFE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX3054/MAX3055/ MAX3056 ±80V Fault-Protected/Tolerant CAN Transceiver General Description The MAX3054/MAX3055/MAX3056 are interfaces between the protocol controller and the physical wires of the bus lines in a controller area network (CAN). The devices provide differential transmit capability and switch to single-mode if certain fault conditions occur. The MAX3054/MAX3055/MAX3056 guarantee full wakeup capability during failure modes. The extended fault-protected voltage range of CANH and CANL bus lines of ±80V. Current-limiting and thermalprotection circuits protect the transmitter output stage against overcurrent faults to prevent destruction of the transmitter output stage. The CANH and CANL lines are also protected against electrical transients that may occur in rugged environments.
Published: |