Datasheet4U Logo Datasheet4U.com

MAX14955 - Single-Lane PCIe Gen III Redriver

Description

The MAX14955 dual equalizer/redriver improves PCI Express® (PCIe) signal integrity by providing programmable input equalization.

This feature reduces deterministic jitter and redrives circuitry to reestablish deemphasis, which compensates for circuit-board loss at high frequencies.

Features

  • electrical idle and receiver detection. The MAX14955 is available in a small, 40-pin, 5.0mm x 5.0mm TQFN package with flow-through traces for optimal layout and minimal space requirements. The device is specified over the -40°C to +85°C extending operating temperature range.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1495 3.5- and 4.5-Digit / Single-Chip ADCs Maxim
MAX149 +2.7V to +5.25V / Low-Power / 8-Channel / Serial 10-Bit ADCs Maxim
MAX1490A Complete / Isolated RS-485/RS-422 Data Interface Maxim
MAX1490B Complete / Isolated RS-485/RS-422 Data Interface Maxim
MAX1490E (MAX1480E / MAX1490E) Isolated RS-485/RS-422 Maxim Integrated Products

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX14950 Quad PCI Express Equalizer/Redriver
MAX14954 Ruggedized Quad PCIe Redriver
MAX14900E Octal Power Switch
MAX14906 Digital I/O
MAX14912 Switch/Push-Pull Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX14955 Single-Lane PCIe Gen III Redriver with Equalization and Extended Temperature Operation General Description The MAX14955 dual equalizer/redriver improves PCI Express® (PCIe) signal integrity by providing programmable input equalization. This feature reduces deterministic jitter and redrives circuitry to reestablish deemphasis, which compensates for circuit-board loss at high frequencies. The device permits optimal placement of key PCIe components and allows for longer runs of stripline, microstrip, or cable. The device contains two identical channels capable of equalizing PCIe Gen III (8GT/s), Gen II (5GT/s), and Gen I (2.5GT/s) signals and features electrical idle and receiver detection. The MAX14955 is available in a small, 40-pin, 5.0mm x 5.
Published: |