Datasheet4U Logo Datasheet4U.com

MAX5924 - N-channel Hot-swap Controllers

Description

The MAX5924/MAX5925/MAX5926 1V to 13.2V hot-swap controllers allow the safe insertion and removal of circuit cards into live backplanes.

Features

  • ot Swap 1V to 13.2V with VCC ≥ 2.25V Drive High-Side n-Channel MOSFET Operation With or Without RSENSE Temperature-Compensated RDS(ON) Sensing Protected During Turn-On into Shorted Load Adjustable Circuit-Breaker Threshold Programmable Slew-Rate Control Programmable Turn-On Voltage Autoretry or Latched Fault Management 10-Pin µMAX® or 16-Pin QSOP Packages MAX5924/MAX5925/MAX5926 Ordering Information PART MAX5924AEUB MAX5924BEUB MAX5924CEUB.
  • MAX5924DEUB.
  • MAX5925AEUB MAX5925BEUB.
  • MAX.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5920 -48V Hot-Swap Controller Maxim
MAX5921 -48V Hot-Swap Controllers Maxim
MAX5922 +48V / Single-Port Network Power Switch Maxim
MAX5923 +60V Simple Swapper Hot-Swap Switch Maxim
MAX5927 Hot-Swap Controllers/Power Sequencers Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX5925 N-channel Hot-swap Controllers
MAX5926 N-channel Hot-swap Controllers
MAX5913A +48V Quad Hot-Swap Controllers
MAX5914A +48V Quad Hot-Swap Controllers
MAX5933A Positive High-Voltage Hot-Swap Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3443; Rev 2; 10/06 KIT ATION EVALU E L B AVAILA www.DataSheet4U.com 1V to 13.2V, n-Channel Hot-Swap Controllers Require No Sense Resistor General Description The MAX5924/MAX5925/MAX5926 1V to 13.2V hot-swap controllers allow the safe insertion and removal of circuit cards into live backplanes. These devices hot swap supplies ranging from 1V to 13.2V provided that the device supply voltage, VCC, is at or above 2.25V and the hotswapped supply, VS, does not exceed VCC. The MAX5924/MAX5925/MAX5926 hot-swap controllers limit the inrush current to the load and provide a circuitbreaker function for overcurrent protection. The devices operate with or without a sense resistor.