Datasheet4U Logo Datasheet4U.com

MAX4411 - Stereo Headphone Amplifier

General Description

The MAX4411 fixed-gain, stereo headphone amplifier is designed for portable equipment where board space is at a premium.

Key Features

  • o No Bulky DC-Blocking Capacitors Required o Fixed -1.5V/V Gain Eliminates External Feedback Network MAX4411: -1.5V/V MAX4411B: -2V/V o Ground-Referenced Outputs Eliminate DC-Bias Voltages on Headphone Ground Pin o No Degradation of Low-Frequency Response Due to Output Capacitors o 80mW per Channel into 16Ω o Low 0.003% THD+N o High PSRR (86dB at 217Hz) o Integrated Click-and-Pop Suppression o 1.8V to 3.6V Single-Supply Operation o Low Quiescent Current (5mA) o Independent Left/Right, Low-Power.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX441 Low-Power / +3V/+5V / 400MHz Single-Supply Op Amps Maxim
MAX4410 80mW / DirectDrive Stereo Headphone Driver Maxim
MAX4412 Low-Cost / Low-Power / Ultra-Small / 3V/5V / 500MHz Single-Supply Op Amps Maxim
MAX4413 Low-Cost / Low-Power / Ultra-Small / 3V/5V / 500MHz Single-Supply Op Amps Maxim
MAX4414 Low-Power / +3V/+5V / 400MHz Single-Supply Op Amps Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX44000 Ambient and Infrared Proximity Sensor
MAX44007 Low-Power Digital Ambient Light Sensor
MAX44009 Ambient Light Sensor
MAX4409 Stereo Headphone Amplifier
MAX44250 (MAX44250 - MAX44252) Low-Noise Op Amps

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 19-2618; Rev 1; 4/03 80mW, Fixed-Gain, DirectDrive, Stereo Headphone Amplifier with Shutdown General Description The MAX4411 fixed-gain, stereo headphone amplifier is designed for portable equipment where board space is at a premium. The MAX4411 uses a unique, patented DirectDrive architecture to produce a ground-referenced output from a single supply, eliminating the need for large DC-blocking capacitors, saving cost, board space, and component height. Additionally, the gain of the amplifier is set internally (-1.5V/V, MAX4411 and -2V/V, MAX4411B), further reducing component count. The MAX4411 delivers up to 80mW per channel into a 16 Ω load and has low 0.003% THD+N.