Datasheet4U Logo Datasheet4U.com

MAX1960 - 1MHz PWM Step-Down Controllers

Description

The MAX1960/MAX1961/MAX1962 high-current, highefficiency voltage-mode step-down DC-DC controllers operate from a 2.35V to 5.5V input and generate output voltages down to 0.8V at up to 20A.

An on-chip charge pump generates a regulated 5V for MOSFET drive.

Features

  • o 0.5% Accurate Output o Operates from 2.35V to 5.5V Supply o Generates Low Output Voltage Down to 0.8V o o o o o o o o On-Chip Charge Pump Provides 5V Gate Drive Ceramic or Electrolytic Capacitors 94% Efficiency External Synchronization from 450kHz to 1.2MHz 500kHz/1MHz Fixed-Frequency PWM Operation Fast Transient Response Two Converters Can Operate 180° Out-of-Phase ±4% Voltage Margining for System Test MAX1960/MAX1961/MAX1962 o 10% Accurate Current Sensing (MAX1962) o Adaptive Dead Time Pre.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX196 Multirange / Single %V / 12-Bit DAS with 12-Bit Bus Interface Maxim
MAX1963 Low-Input-Voltage / 300mA LDO Regulators with RESETin SOT and TDFN Maxim
MAX1963A 300mA LDO Regulators Maxim Integrated
MAX1966 Low-Cost Voltage-Mode PWM Step-Down Controllers Maxim
MAX1967 Low-Cost Voltage-Mode PWM Step-Down Controllers Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX1961 1MHz PWM Step-Down Controllers
MAX1962 1MHz PWM Step-Down Controllers
MAX1964 Tracking/Sequencing Triple/Quintuple Power-Supply Controllers
MAX1965 Tracking/Sequencing Triple/Quintuple Power-Supply Controllers
MAX1907A Quick-PWM Master Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-2740; Rev 0; 1/03 KIT ATION EVALU E L B A IL AVA www.DataSheet4U.com 2.35V to 5.5V, 0.5% Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining General Description The MAX1960/MAX1961/MAX1962 high-current, highefficiency voltage-mode step-down DC-DC controllers operate from a 2.35V to 5.5V input and generate output voltages down to 0.8V at up to 20A. An on-chip charge pump generates a regulated 5V for MOSFET drive. Additionally, adaptive dead-time drivers allow a wide variety of MOSFETs to be used without risking shoot-through. Fixed-frequency PWM operation and external synchronization make these controllers suitable for telecom and datacom applications. The operating frequency is programmable to either 500kHz or 1MHz, or from 450kHz to 1.2MHz with an external clock.