Datasheet4U Logo Datasheet4U.com

DS4520 - I/O Expander Plus Memory

General Description

The DS4520 is a 9-bit nonvolatile (NV) I/O expander with 64 bytes of NV user memory controlled by an I2Ccompatible serial interface.

The DS4520 offers users a digitally programmable alternative to hardware jumpers and mechanical switches that are being used to control digital logic nodes.

Key Features

  • Programmable Replacement for Mechanical Jumpers and Switches.
  • Nine NV Input/Output Pins.
  • 64-Byte NV User Memory (EEPROM).
  • I2C-Compatible Serial Interface.
  • Up to 8 Devices Can be Multidropped on the Same I2C Bus.
  • Open-Drain Outputs with Configurable Pullups.
  • Outputs Capable of Sinking 12mA.
  • Low Power Consumption.
  • Wide Operating Voltage (2.7V to 5.5V).
  • Operating Temperature Range: -40°C to +85°C Ordering Information PART TEMP RANGE D.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS450-3 AC-DC / Distributed Power Front-End 1U Emerson
DS450-3-002 AC-DC / Distributed Power Front-End 1U Emerson
DS450DC-3 AC-DC / Distributed Power Front-End 1U Emerson
DS4000 Digitally Controlled TCXO Dallas Semiconducotr
DS4025 240.192MHz IF SAW Filter Advance Information Mitel Networks Corporation

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
DS4510 CPU Supervisor with Nonvolatile Memory and Programmable I/O
DS4100H 100MHz HCSL Clock Generator
DS4106 (DS4106 - DS4425) Clock Oscillators
DS4125 (DS4xxx) DS4-XO Series Crystal Oscillators
DS4155 (DS4xxx) DS4-XO Series Crystal Oscillators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Click here for production status of specific part numbers. DS4520 9-Bit I2C Nonvolatile I/O Expander Plus Memory General Description The DS4520 is a 9-bit nonvolatile (NV) I/O expander with 64 bytes of NV user memory controlled by an I2Ccompatible serial interface. The DS4520 offers users a digitally programmable alternative to hardware jumpers and mechanical switches that are being used to control digital logic nodes. Furthermore, the digital state of each pin can be read through the serial interface. Each I/O pin is independently configurable. The outputs are open drain with selectable pullups. Each output has the ability to sink up to 12mA.