Datasheet4U Logo Datasheet4U.com

MAP7102 - Dual Output LCD Bias IC

Description

The MAP7102 is designed to support positive / negative driven TFT-LCD panels.

The two output rails are usually connected to the Source Driver IC.

The device uses a single inductor scheme in order to provide the user the smallest solution size possible as well as high efficiency.

Features

  • SIMO(Single-Inductor Multiple output) regulator Technology.
  • 86% Efficiency for 20mA Load current Between +5.0V and -5.0V.
  • 2.8V to 5.5V Input Voltage Range.
  • Under-Voltage Lockout Rising/Falling.
  • Programmable Output Voltages.
  • Positive Output Voltage Range : 4.0V to 5.7V (.

📥 Download Datasheet

Datasheet Details

Part number MAP7102
Manufacturer MagnaChip
File Size 1.00 MB
Description Dual Output LCD Bias IC
Datasheet download datasheet MAP7102 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAP-AM-265 Micro Air Pump Motor MITSUMI
MAP-CA Digital Signal Processor Chip Equator Technologies
MAP100 High Voltage DC Contactors TE
MAP100RBAFE High Voltage DC Contactors TE
MAP101 High Voltage DC Contactors TE

Other Datasheets by MagnaChip

Part Number Description
MAP7101 Synchronous Boost Converter
MAP7103 High Voltage Boost Converter
MAP7154 800mA Buck Converter
MAP7160 600mA Step-Down Converter
MAP3201 High current switch mode PWM LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAP7102 – DualOutput LCDBiasIC Confidential Datasheet Version 1.1 MAP7102 Dual Output LCD Bias IC General Description The MAP7102 is designed to support positive / negative driven TFT-LCD panels. The two output rails are usually connected to the Source Driver IC. The device uses a single inductor scheme in order to provide the user the smallest solution size possible as well as high efficiency. With its input voltage range of 2.8V to 5.5V, it is optimized for products powered by single-cell batteries and output currents up to 50mA. The device is delivered in a WLCSP package of 15 balls.
Published: |