Datasheet4U Logo Datasheet4U.com

MSHFS5 - (MSHFS1 - MSHFS6) Selectable High Frequency LP/BP Filter

This page provides the datasheet information for the MSHFS5, a member of the MSHFS1 (MSHFS1 - MSHFS6) Selectable High Frequency LP/BP Filter family.

Description

The selectable high frequency lowpass/ bandpass filter IC Is a CMOS chip that can be configured for either a lowpass or a bandpass filter.

The lowpass response can be a 6 pole Butterworth, Elliptic or Bessel filter.

Features

  • Six Filter Types In One Package No External Components Switched-Capacitor Filters High Frequency Operation Input Multiplexor Adjustable Gain 0, 10 or 20 dB Small Package Size Low Cost On Chip Power Save Pin ANSI Compatible Bandpass.

📥 Download Datasheet

Datasheet preview – MSHFS5

Datasheet Details

Part number MSHFS5
Manufacturer MSI
File Size 399.28 KB
Description (MSHFS1 - MSHFS6) Selectable High Frequency LP/BP Filter
Datasheet download datasheet MSHFS5 Datasheet
Additional preview pages of the MSHFS5 datasheet.

📁 Similar Datasheet

  • MSH - 3.2 X 2.5 Ceramic SMD Oscillator (MMD Components)
  • MSH20120V1 - Silicon Carbide Diode (Maple Semiconductor)
Other Datasheets by MSI
  • MSHFS1 - (MSHFS1 - MSHFS6) Selectable High Frequency LP/BP Filter
  • MSHFS2 - (MSHFS1 - MSHFS6) Selectable High Frequency LP/BP Filter
  • MSHFS3 - (MSHFS1 - MSHFS6) Selectable High Frequency LP/BP Filter
  • MSHFS4 - (MSHFS1 - MSHFS6) Selectable High Frequency LP/BP Filter
  • MSHFS6 - (MSHFS1 - MSHFS6) Selectable High Frequency LP/BP Filter

Full PDF Text Transcription

Click to expand full text
5/2004 Selectable High Frequency LP/BP Filter Preliminary Data Sheet Description The selectable high frequency lowpass/ bandpass filter IC Is a CMOS chip that can be configured for either a lowpass or a bandpass filter. The lowpass response can be a 6 pole Butterworth, Elliptic or Bessel filter. The band pass response can be a six pole full, third or sixth octave bandpass filter. The device uses switched-capacitor filters and no external components (except for decoupling capacitors) are required, Only an external clock is needed. A four input multiplexor and externally selectable gain setting pin, along with a power down and clock to corner ratio select pin are included in the 16 pin version. An 8 pin version is also available for compact PC board layouts.
Published: |