Datasheet4U Logo Datasheet4U.com

MP6411 - Windowed Watchdog Timer

Description

The MP6411 is a windowed watchdog timer.

It is used to reset and monitor the microcontroller.

In normal operation, the MCU sends a trigger signal to the MP6411 in a defined time window cyclically.

Features

  • Windowed Watchdog.
  • Power-On Reset during Power-Up and Under Voltage.
  • Programmable Short Window Mode or Long Window Mode.
  • Watchdog Disable Function.
  • Low Shutdown Mode Current.
  • SOIC8 Package.

📥 Download Datasheet

📁 Similar Datasheet

  • MP6403 - Power MOSFET (Toshiba Semiconductor)
  • MP640B - Low Cost Quartz Crystal (CTS)
  • MP640B-E - Low Cost Quartz Crystal (CTS)
  • MP6 - AC-DC / Configurable (Emerson)
  • MP60-E - PENTIUM PRO PROCESSOR VOLTAGE REGULATOR MODULE (Semtech Corporation)
  • MP60-F - KLAMATH PROCESSOR VOLTAGE REGULATOR MODULE (Semtech Corporation)
  • MP6005 - SINGLE-PHASE SILICON BRIDGE RECTIFIER (Dc Components)
  • MP601 - SINGLE-PHASE SILICON BRIDGE RECTIFIER (Dc Components)
  • MP602 - SINGLE-PHASE SILICON BRIDGE RECTIFIER (Dc Components)
  • MP604 - SINGLE-PHASE SILICON BRIDGE RECTIFIER (Dc Components)
Other Datasheets by MPS
  • MP6411GS - Windowed Watchdog Timer
  • MP6412 - Load-Switch Controller
  • MP6412GQGU - Load-Switch Controller
  • MP6400 - Low Quiescent Current Programmable-Delay Supervisory Circuit
  • MP6002 - Monolithic Flyback/Forward DC-DC Converter
  • MP6002DN - Monolithic Flyback/Forward DC-DC Converter
  • MP6003 - Monolithic Flyback/SEPIC DC-DC Converter
  • MP6003DN - Monolithic Flyback/SEPIC DC-DC Converter

Full PDF Text Transcription

Click to expand full text
The Future of Analog IC Technology DESCRIPTION The MP6411 is a windowed watchdog timer. It is used to reset and monitor the microcontroller. In normal operation, the MCU sends a trigger signal to the MP6411 in a defined time window cyclically. A missing or fault trigger signal causes the watchdog to reset the MCU. The MP6411 provides a reset signal (low-level voltage) to the MCU during power-up or under voltage. Its power supply (VCC) has 5V and 3.3V options. By setting MODE to high or low, the watchdog operates in long window mode or short window mode; the window is programmable. The MP6411 is available in SOIC8 package.
Published: |