MP5025C - Hot-Swap Protection Device

Datasheet Details

The MP5025C is a hot-swap protection device designed to protect circuitry on its output from transients on its input. The MP5025C also protects its input from unwanted shorts and transients coming from its output. During start-up, inrush current is limited by the slew rate at the output. The slew rate is controlled by an external capacitor at SS. The maximum load at the output is currentlimited through sense FET topology. The magnitude of the current limit is controlled by a low-power resistor.

📁 MP5025C Similar Datasheet

MP502 - PRESS-FIT MOTOLOLA DIODES (Shunye)
MP502M - High Current Glass Passivated Molding Single-Phase Bridge Rectifier (Leshan Radio Company)
MP502W - Single Phase Bridge Rectifier (MCC)
MP5005 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
MP5005W - Single Phase Bridge Rectifier (MCC)
MP5006 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
MP5007 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
MP5008 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)

Other Datasheets by MPS

Published: Dec 11, 2024 |