Datasheet4U Logo Datasheet4U.com

MP5000DQ - 5A Programmable Current Limit Switch

Download the MP5000DQ datasheet PDF. This datasheet also covers the MP5000 variant, as both devices belong to the same 5a programmable current limit switch family and are provided as variant models within a single manufacturer datasheet.

Description

The MP5000 is a protection device designed to protect circuitry on the output (source) from transients on input (VCC).

It also protects VCC from undesired shorts and transients coming from the source.

At start up, inrush current is limited by limiting the slew rate at the source.

Features

  • Integrated 44mΩ Power FET.
  • Enable/Fault Pin.
  • Adjustable Slew Rate for Output Voltage.
  • Adjustable Current Limit: 1-5A.
  • Thermal Protection.
  • Over Voltage Limit.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MP5000-MPS.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MP5005 50 Amp Single Phase Bridge Rectifier Micro Commercial Components
MP5005 PRESS-FIT MOTOLOLA DIODES Shunye
MP5005W Single Phase Bridge Rectifier MCC
MP5006 50 Amp Single Phase Bridge Rectifier Micro Commercial Components
MP5007 50 Amp Single Phase Bridge Rectifier Micro Commercial Components

Other Datasheets by Monolithic Power Systems

Part Number Description
MP5000 5A Programmable Current Limit Switch
MP5000A 5A Programmable Current Limit Switch
MP5000ADQ 5A Programmable Current Limit Switch
MP5000S 5A Programmable Current Limit Switch
MP5000SDQ 5A Programmable Current Limit Switch

Full PDF Text Transcription

Click to expand full text
The Future of Analog IC Technology MP5000 12V, 5A Programmable Current Limit Switch DESCRIPTION The MP5000 is a protection device designed to protect circuitry on the output (source) from transients on input (VCC). It also protects VCC from undesired shorts and transients coming from the source. At start up, inrush current is limited by limiting the slew rate at the source. The slew rate is controlled by a small capacitor at the dv/dt pin. The dv/dt pin has an internal circuit that allows the customer to float this pin (no connect) and still receive 1.1ms ramp time at the source. The max load at the output (source) is current limited. This is accomplished by utilizing a sense FET topology.
Published: |