MM1382 - RGB Video Amplifier with OSD Input

Product Overview

MITSUMI

Part number	MM1382
Manufacturer	MITSUMI
File Size	268.14 KB
Description	RGB Video Amplifier with OSD Input
Datasheet	MM1382 Datasheet
Additional preview pages of the MM1382 datasheet.

Pin no.

1. Built-in wideband video amp 110MHz @ -3dB (4VP-P output) 2. OSD input has TTL interface bandwidth 50MHz 3. Output voltage less than 0.1V for blanking 4. High-speed switching between VIDEO/OSD 5. Each channel has an independent drive pin for color balance adjustment 6. Built-in high impedance DC contrast control, 0~4V (> 40dB range) 7. Built-in high impedance DC drive control, 0~4V (±3dB range) 8. Built-in high impedance DC OSD contrast control, 0~4V (> 40dB range) 9. 7VP-P output swing (band.

📁 Similar Datasheet

MM1385 - Microminiature Low-Power Consumption Low-Saturation Regulator (Mitsumi Electronics)
MM1389 - Pedestal Clamp 2-Input 1-Output 3-Circuit Video Switch (Mitsumi Electronics)
MM1311 - I2C BUS Control 4-Input 1-Output AV Switch Monolithic IC MM1311 (ETC)
MM1320 - Microminiature Low-Noise / Low-Saturation Three-Pin Regulator (MITSUMI ELECTRIC)
MM1323 - LCD Interface Monolithic IC (MITSUMI ELECTRIC)
MM1326 - (MM1326/1354/1369) Q Xpander Processors (Mitsumi Electric)
MM1327 - Wide Discriminator (MITSUMI ELECTRIC)
MM1354 - (MM1326/1354/1369) Q Xpander Processors (Mitsumi Electric)

Other Datasheets by MITSUMI

Published: May 7, 2005 |