Datasheet4U Logo Datasheet4U.com

MM1332 - Control of Lithium Ion Batteries Charging

Description

SOP-8C/SOP-8E Pin No.

Name SW1 I/O Input SW1=VCC : OFF, SW1=GND : ON Goes OFF when open as it is pulled up to VCC.

Low voltage detection circuit ON/OFF control input pin.

Features

  • 1. Output voltage (Ta=-20°C+~70°C) 3Cell : 12.3V/12.6V±150mV 2Cell : 8.2V/8.4V±100mV 1Cell : 4.1V/4.2V±50mV 250µA typ. set by external resistance 0.1V=external resistance current value 2.0V/cell 2. Current consumption 3. Constant current output Current limit (reference voltage) 4. Low voltage detection function (LV) Package SOP-8C, SOP-8E (MM1332 F) The box represents the output (charging) voltage rank.

📥 Download Datasheet

Datasheet Details

Part number MM1332
Manufacturer MITSUMI
File Size 93.14 KB
Description Control of Lithium Ion Batteries Charging
Datasheet download datasheet MM1332 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MM1311 I2C BUS Control 4-Input 1-Output AV Switch Monolithic IC MM1311 ETC
MM1320 Microminiature Low-Noise / Low-Saturation Three-Pin Regulator MITSUMI ELECTRIC
MM1323 LCD Interface Monolithic IC MITSUMI ELECTRIC
MM1326 (MM1326/1354/1369) Q Xpander Processors Mitsumi Electric
MM1327 Wide Discriminator MITSUMI ELECTRIC

Other Datasheets by MITSUMI

Part Number Description
MM1331 Step-Up DC/DC Converter
MM1333 Lithium-Ion Battery Charge Controller
MM1336 Headphone Stereos
MM1302A Protection of Lithium Ion Batteries (two cells in series)
MM1302E Protection of Lithium Ion Batteries (two cells in series)

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MITSUMI Control of Lithium Ion Batteries Charging MM1332 Control of Lithium Ion Batteries Charging Monolithic IC MM1332 Outline This IC is a high precision constant voltage constant current power source controller for lithium ion batteries serving as power drivers for P-MOS FET. It was developed for use with one to three cell chargers, and the constant current value can be set freely with external resistance. It has a built-in amplifier for detecting low battery voltage. Using this IC enables the easy addition of a lithium ion battery charging function to conventional battery-charging devices. Features 1. Output voltage (Ta=-20°C+~70°C) 3Cell : 12.3V/12.6V±150mV 2Cell : 8.2V/8.4V±100mV 1Cell : 4.1V/4.2V±50mV 250µA typ. set by external resistance 0.
Published: |