Datasheet4U Logo Datasheet4U.com

KCS057QV1AJ-G32 - LCD Module

Description

Synchronous signal for driving scanning line Data signal latch clock Data signal shift clock Display control signal Power supply for logic GND Power supply for LCD Display data H(ON),L(OFF) LEVEL H H → L H → L H(ON),L(OFF) ― ― ― Recommended matching connector :51021-1500(Molex) NOTE) This is assi

Features

  • Non-load output voltage (VS) of the inverter should be designed to have some margin, because VS may increase due to the leak current which may be caused by wiring of CFL cables. (Reference value: 1035 Vrms MIN. ) Do not apply more than (6.0)mA due to over current. discharge tube current. Because CFL may.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
1. Application This data sheet defines the specification for a (320×3)×240 dot, STN Transmissive color dot matrix type Liquid Crystal Display with CFL backlight. 2. Construction and Outline (320×3)×240 dots, COB type LCD with CFL backlight. Backlight system Inverter : Side-edge type CFL (1 tube). : Option. Recommended Inverter : PH-BLC08-K3 (HITACHI MEDIA ELECTRONICS) or equivalent. : Glare treatment. : Bias voltage circuit, Randomizing circuit. Polarizer Additional circuit Backlight case Driver IC Color filter Polarizer Glass R G B R G B R G B R G B Diffuser Protective resin Au wire Additional circuit Backlight case Liquid crystal CFL tube This drawing is showing conception only. - 1 - 3.
Published: |