T491A106K010AT Datasheet - Kemet

T491A106K010AT Capacitors

Kemet Capacitors KEMET WET TANTALUM CAPACITORS Wet tantalum capacitors are usually applied in circuits where the AC component is small compared to the DC component. Typical uses known to KEMET Electronics include blocking, by-passing, decopling, and filtering. They are also used in timing circuits. If two of these capacitors are connected “back-to-back” (i.e., negative-to-negaive or positive-to-positive), the pair may be used in AC applications (as a non-polar device). Operating temperature:

T491A106K010AT Features

* of multilayer ceramic caps (low ESR and high frequency cap retention), aluminum electrolytics (benign failure mode), and proven solid tantalum technology (volumetric efficiency, surface mount capability, and no wearout mechanism). The KO-CAP can reduce component counts, eliminate through-hole assemb

T491A106K010AT Datasheet (1.05 MB)