Datasheet4U Logo Datasheet4U.com

JW1530 - High Efficiency Off-line CV Regulator

General Description

The JW®1530 is a high efficiency low cost off-line constant voltage regulator for Buck and BuckBoost topology with 700V MOSFET integrated.

JW1530 can output 5V default voltage with few external components, which decreases the system cost.

Key Features

  • Ultra low system BOM cost.
  • Integrated with 700V, low Rdson MOSFET.
  • 5V default output voltage.
  • Peak current mode control.
  • Built-in 30KHz Oscillator with frequency Jittering.
  • High efficiency over wide operating range.
  • VDD UVLO.
  • Short circuit protection.
  • Pulse-by-pulse current limit.
  • Over temperature protection.
  • TO-92,SOT23-3 package.

📥 Download Datasheet

Datasheet Details

Part number JW1530
Manufacturer JoulWatt
File Size 699.85 KB
Description High Efficiency Off-line CV Regulator
Datasheet download datasheet JW1530 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
JW1236B Full color LED control chip ETC
JW1758A Offline Step-down LED Controller SPMICRO
JW1758B Offline Step-down LED Controller SPMICRO
JW1758C Offline Step-down LED Controller SPMICRO
JW1760 Non-Isolated Buck LED Driver Controller SPMICRO

Other Datasheets by JoulWatt

Part Number Description
JW15310 BUCK CC/CV Controller
JW1531B BUCK CC/CV Driver
JW1531M BUCK CC/CV Driver
JW1531O BUCK CC/CV Controller
JW15328A High Efficiency Off-line CV Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
JW1530 Parameters Subject to Change Without Notice DESCRIPTION The JW®1530 is a high efficiency low cost off-line constant voltage regulator for Buck and BuckBoost topology with 700V MOSFET integrated. JW1530 can output 5V default voltage with few external components, which decreases the system cost. In light load condition, JW1530 operates in green mode, in which the inductor peak current and the switching frequency is lower than that of full load to improve the system efficiency and the reference voltage is decreased to ensure good load regulation.