Datasheet4U Logo Datasheet4U.com

HA1-5104883 - Low Noise/ High Performance/ Quad Operational Amplifier

General Description

Low noise and high performance are key words describing the unity gain stable HA-5104/883.

This general purpose quad amplifier offers an array of dynamic specifications including 1V/µs slew rate (min), and 8MHz bandwidth (typ).

Key Features

  • make this amplifier ideally suited for designs ranging from audio amplifiers and active filters to the most demanding signal conditioning and instrumentation circuits. Features.
  • This Circuit is Processed in Accordance to MIL-STD883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1.
  • Low Input Noise Voltage Density at 1kHz. . 6nV/√Hz (Max) 4.3nV/√Hz (Typ).
  • Slew Rate.
  • . . 1V/µs (Min) 3V/µs (Typ).
  • Unity Gain.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HA10 Current Transducer 5/10a LEM
HA1099 18-pin Flash microcontroller Introduction Microchip
HA11 1.0 AMP.HIGH EFFICIENCY RECTIFIERS Jinan Gude Electronic Device
HA11122W Amplifier System Hitachi
HA11211 FM / AM Stereo Receiver System Hitachi

Other Datasheets by Intersil (Renesas)

Part Number Description
HA1-5104-2 Dual and Quad/ 8MHz and 60MHz/ Low Noise Operational Amplifiers
HA1-5104-5 Dual and Quad/ 8MHz and 60MHz/ Low Noise Operational Amplifiers
HA1-5114883 Quad/ Low Noise/ High Performance Uncompensated Operational Amplifier
HA1-5134-5 4MHz/ Precision/ Quad Operational Amplifier
HA1-5190-2 150MHz/ Fast Settling Operational Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HA-5104/883 July 1994 Low Noise, High Performance, Quad Operational Amplifier Description Low noise and high performance are key words describing the unity gain stable HA-5104/883. This general purpose quad amplifier offers an array of dynamic specifications including 1V/µs slew rate (min), and 8MHz bandwidth (typ). Complementing these outstanding parameters are very low noise specifications of 4.3nV/√Hz at 1kHz (typ) or 6nV/√Hz (max). Fabricated using the Intersil standard high frequency D.I. process, these operational amplifiers also offer excellent input specifications such as 2.5mV (max) offset voltage and 75nA (max) offset current. Complementing these specifications are 100dB (min) open loop gain and 55dB channel separation (min).